Select Page

Kleenoil – Oil Recycling Systems

Industrial Composter and Composting Machine

Today, there is finally a technology that actually goes beyond zero waste. The water produced from everyday common organic waste can be used in irrigation applications, cleaned further for potability or similarly returned to the ecosystem through septic systems and sewers. This new technology has enabled us to harness the energy of microorganisms and utilize them in a perfectly created environment to dispose of up to 2400 pounds of food waste per day – reducing it to harmless gray water.

 

Applications (Check below to view from Automotive – Mining)

Automotive Trucking Transit Bus
Construction Oil Field Marine
Hydraulics OEM Agriculture
City – Municipality Concrete – Redi-Mix Mining

 

Models KU06 KU16 KU50 KU65 KU85
Engine Sump Capacity Up to 6 Quarts Up to 16 Quarts Up to 50 Quarts Up to 65 Quarts Up to 85 Quarts
Hydraulic Tank Capacity None Up to 60 Gallons Up to 200 Gallons Up to 300 Gallons Up to 400 Gallons
Water Retention <0.05% 0.026 Gallons 0.07 Gallons 0.12 Gallons 0.20 Gallons 0.26 Gallons
0.104 Quarts 0.28 Quarts 0.48 Quarts 0.80 Quarts 1.04 Quarts
Height 6.125 inches 6.25 inches 6.50 inches 6.25 inches 6.63 inches
15.558 cm 15.875 cm 16.51 cm 15.875 cm 16.84 cm
Diameter 3.00 inches 4.63 inches 7.25 inches 9.50 inches 10.0 inches
7.62 cm 11.76 cm 18.415 cm 24.13 cm 25.4 cm
Type of Usage Smallest engines, passenger cars, fork lifts Small engines, small hydraulic systems,  trucks Over the road truck engines, hydraulic systems, diesel fuel filtration, construction equip. Diesel EGR engines, hydraulic systems, diesel fuel filtration Larger engines, hydraulic systems, drilling rigs, diesel fuel filtration

 

Auto & Truck

The cleanliness of your engine fluid is crucial to the trouble-free and cost-effective operation of your engine system. Engine components are costly and need special consideration when this fluid is selected and subsequently filtered.

The ISO 4406 Code is a recognized standard in the industry. Certain recommended cleanliness quantities are necessary to realize the most efficient performance of your system.

As soon as you start your engine, you begin the deterioration process of your oil. As the engine runs, dirt, wear metal particles, fuel, soot, and water start to weaken your oil’s lubrication and protection properties. These harmful elements can be eliminated by an oil drain, but once the oil is replaced, the deterioration process just starts over again.

We have been taught that regular oil drains and filter changes are required to protect our engines and hydraulic systems. The Kleenoil Filtration System, however, allows us to extend the time between oil drains as well as reducing the adverse effects of harmful particles in the engine.

Normal spin on full-flow filters on your car or truck have approximately 90 to 130 quarts of oil passing through the filter media each minute. As a result, the fluid passes through so quickly that it cannot be finely filtered, nor can water be removed. While the film of oil between moving parts in an engine is generally about 3 microns, regular oil filters only filter down to between 15 and 40 microns.

The Kleenoil filter, however, is a bypass filter that passes only a small portion of the total oil flow through a very dense filtering media at about 2.5 quarts per minute. At this speed, it is possible to remove particles down to 1 micron and totally remove water, greatly decreasing engine wear and prolonging oil life.

Key Benefits of Kleenoil for Consumer Automobiles and Truck Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for your truck or automobile if:

  • You put a large amount of miles/hours on your vehicle annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals.
    You could save as much as 90% over your previous oil maintenance schedule.
  • Vehicle downtime is simply not an option.
  • You simply want the ultimate in protection for your vehicle and want to maximize the life of the engine or transmission.

Construction

Equipment downtime = lost money in the construction industry! If you have to pull your equipment out of service due to overdue oil changes, have costly engine overhauls due to wear that happens when you operate in extreme conditions and environments or simply cannot afford to have any equipment downtime, then Kleenoil Bypass Filtration Systems just might be the answer you are looking for to keep your equipment up and running.

Construction equipment by it’s very design and nature will be used and operated in the harshest, dirtiest, and most rugged environments. Surprisingly, construction equipment is equipped with ordinary full-flow filters which can not remove the greater amounts of solid contaminants that enter through the air intake or are introduced into hydraulic systems. Often, as a practical solution, maintenance managers will change oil and filters earlier and more often to reduce engine wear. This, of course, increases the oil change cost and when you are figuring a large fleet of equipment, these increases in cost can rapidly get into the hundreds of thousands of dollars rather quickly.

Key Benefits of Kleenoil for Construction Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Bypass Filtration can be a valuable addition for construction equipment if:

  • You put a large amount of miles/hours on your construction equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

Hydraulics

When a hydraulic system becomes contaminated with water, metal and/or dirt particles and other foreign debris; it is nearly impossible to completely remove all contamination from the entire system without total disassembly and cleaning.

Water is one of the primary killers of a hydraulic oil system!  Water will do two things that are very bad:  emulsification and thickening of the oil both of which reduce its effectiveness and lubricating capabilities.

The Kleenoil Onboard Oil Recycling System will eliminate the potential for this being an issue and give you peace of mind knowing you are doing everything you can to reduce, if not eliminate, the need for costly hydraulic oil changes!

Virtually removes 100% of all wear metals, water and soot from existing hydraulic fluids saving potentially thousands of dollars over costly oil changes.The Kleenoil Onboard Oil Recycling System will also remove sludge and debris and keep your oil reservoir in much cleaner condition. This will allow you to keep your systems pumps, valves, lines, cylinders, controls, heat exchangers and reservoir with clean oil on an almost constant basis.

It is not unusual when an oil and filter change is performed on a hydraulic system that between 1/3 and 1/2 of the system’s total contaminated oil still remains in the system along with all of the sludge and debris in the  reservoir. Therefore, only between 1/2 and 1/3 of the oil is actually replaced with new oil when doing an oil change on a hydraulic system!  This means when you do your normal oil changes, all of the sludge and debris is dissolved, suspended and placed  back into the oil which is then distributed to all of the systems’ component parts making the new hydraulic oil you just placed in the system immediately dirty again!

This type of service, coupled with the general lack of timely maintenance on most hydraulic systems and transmissions, renders the “typical oil and filter change” ineffective in reducing system component wear and failure. Oil analysis and actual machine performance always supports this claim.

Key Benefits of Kleenoil for Hydraulics Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for hydraulic applications if:

  • You put a large amount of hours on your hydraulic system annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save
    as much as 90% over your previous oil maintenance schedule.
  • Hydraulic system downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of your hydraulic systems
    or transmissions.

City/Municipality

Kleenoil offers many options for city and municipality fleets, fire, police, and city waste removal equipment for the city manager looking to extend equipment life, reduce downtime and cut maintenance costs! Kleenoil Onboard Oil Recycling Systems also offer an excellent option for cities looking to not only talk the talk when saying they are “going green” but walk the walk through installation of an onboard oil recycling system on their city equipment. This goes beyond simply using recycled paper or putting a green tree on correspondence and it also allows for an easily quantifiable way to save your city a lot of money through reduced oil changes.
Key Benefits of Kleenoil for City, Public Works, Municipality Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for city, public works, and municipality applications if:

  • You put a large amount of miles/hours on your construction equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

Commercial Trucks

Bypass oil filtration technology was originally introduced to the trucking industry in the 1930’s. It was the exclusive means for filtering engine oil from the early 1930’s until the early 1960’s.

At that time, engine manufactures moved away from bypass filtration when full flow filtration became vogue. People saw full flow as having the ability to filter all the oil at once as opposed to the 10% at a time that bypass filtration does even though full flow filters don’t have the ability to filter out anything but the largest particles out of the oil.

Factory full flow oil filters are not even designed to purify the oil down to a single digit micron level but mainly to filter all the oil at a high rate before it gets to the engine. Since full flow filters filter the oil at such a high flow rate, it is unable to trap the microscopic particles that enter the oil and which can damage your motor.

During the last 10 years bypass filtration interest has been re-sparked and has been positioned mainly as a way for fleets to extend engine oil life and oil drain intervals. People now realize you can have the best of both worlds by running bypass filtration along side your full flow filter. This allows the full flow filter to catch the large particles and the Kleenoil Bypass Filtration System to catch particles down to 1-micron in size, all the water and acid, as well as the soot that will inevitably end up in diesel engine oil.

Kleenoil Bypass Filtration Systems can help prevent a buildup of contaminants that can score bearings, rings and cylinder walls of the expensive engines in your truck fleet. Contamination also can contribute to an increase in viscosity and gum deposits on rings and valves. Because filtration is necessary for effective engine protection, it is important to make sure you have the best available system in good working order. According to Fleet Equipment Magazine, 60 percent of the potential causes of wear and failure can be eliminated by well-designed and properly applied filtration systems.

Kleenoil Bypass Filtration Systems are especially beneficial on the newer EGR (exhaust gas recirculation) diesel engines as they will run hotter and produce more soot and acids than previous models of diesel engines. The very nature of how these newer EGR engines function makes Kleenoil Bypass filtration a must have on these newer trucks!

Most engine builders have decided that cooled EGR is the most effective way to reduce combustion temperatures. Small amounts of exhaust gas will be piped to the chambers to displace oxygen; less oxygen means cooler combustion. Before going to the cylinders, some of the exhaust gas heat will be absorbed by the engine’s coolant, thus the term “cooled EGR.”

Federal rules now require diesel engines to produce about 50% less nitrous oxide, or NOx, than current diesels thus the reason for the newer EGR diesel motors. More heat, soot and acid will form during combustion in most of these new EGR diesels, say engineers. With greater amounts of soot and acid making it’s way into the engine oil, the Kleenoil Bypass Filter is no longer considered an optional item. It is a must have if you want to reduce operational costs and maximize the life of these expensive engines!
Key Benefits of Kleenoil for Trucking or Fleet Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for trucking or fleet applications if:

  • You put a large amount of miles/hours on your trucks or fleet equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

 

Oil Field

Oil drilling rigs oil change costs vary depending on whether its a land based rig or water based. Obviously, it is extremely expensive to do an oil change in either environment but when the change is done on the ocean, extreme care has to be exercised as well as careful planning on getting the old, used oil off the drilling rig and safely back to land.

On the water based rigs, the two main concerts are water pollution and equipment downtime. Most of the drilling equipment cannot afford to be down even for a few minutes as lost drilling time means lost money for these companies.

Equipment downtime = lost money! Costly engine overhauls due to wear that happens when you operate in these extreme conditions and environments or simply cannot afford to have any equipment downtime, then Kleenoil Bypass Filtration Systems just might be the answer you are looking for to keep your equipment up and running.

Key Benefits of Kleenoil for Oil Field Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for oil field applications if:

  • You put a large amount of miles/hours on your oil field equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

OEM

 

Some customers would prefer to have their Kleenoil Onboard Oil Recycling systems installed as a factory original option when making the initial purchase. Kleenoil offers this as an option for companies looking to have better “factory” filtration option available brand new for you when making new equipment capital purchases. There are benefits such as custom built in systems like the one pictured above where there is factory cutout for the Kleenoil system for a cleaner installation and ease of filter changes without any hoses or mounting hardware visible to the casual eye.

Key Benefits of Kleenoil for OEM Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Remove’s all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for OEM applications if:

  • You want the benefits of bypass filtration on your equipment right from the factory.
  • You want the ability to have Kleenoil Onboard Oil Recycling System cost included in the equipment cost when you make the initial purchase of the equipment.
  • You put a large amount of miles/hours on your equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

 

Concrete Mixers/Redi-Mix

Redi-Mix equipment faces several challenges and potential benefits from using Kleenoil Onboard Oil Recycling equipment both on the engine and hydraulics side. Concrete mixers in general cost upwards of $100,000 each. The engines and hydraulic systems are under constant wear and its extremely expensive to lose one due to hydraulics system failure or engine maintenance. Why leave anything to chance? Kleenoil provides round-the-clock protection for companies that simply cannot afford any downtime in this economy.

Key Benefits of Kleenoil for Concrete Mixers/Redi-Mix Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for concrete mixers/Redi-Mix Applications if:

  • You put a large amount of miles/hours on your equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

Transit/Buses

Public transportation and the bus industry face many challenges due to the constant starting and stopping nature of industry.  This puts enormous stain wear on engines so cleanliness of oil for these applications is a must!

Key Benefits of Kleenoil for Transit, Public Transportation, Bus Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Remove’s all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for transit, public transportation and bus applications if:

  • You put a large amount of miles/hours on your transit, public transportation and bus applications equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

Marine

Marine engines and equipment operate in the most severe environments you can imagine. In these environments, its very important that the engines and hydraulic systems operate efficiently and require little to no downtime. On the land, an oil change is a simple affair but on the water, you can encounter the potential for an oil spill, not to mention just the hassle of having to dispose of the used motor or hydraulic oil and the extreme cost associated with these types of changes. On larger marine engines, these oil changes can run several thousands of dollars and much downtime – often in industries where there can be no downtime.

On marine vessels, the oil changes are typically happening at a more rapid time interval because the engines are running nearly 24 hours a day and until extreme loads. Kleenoil can not only keep your engine oil in a virtually new condition, but virtually eliminate particulate related wear in the engines!

Key Benefits of Kleenoil for Marine Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Remove’s all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for marine applications if:

  • You put a large amount of miles/hours on your marine equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals. You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the engine, hydraulic systems, or transmissions.

Agriculture

Agriculture is a tough business on both people and equipment.  It is essential that your traction, tillage, combine and harvesting equipment stay running all the time. A day burned due to equipment engine failure can be the difference between making your harvest or not for the year.

Kleenoil Onboard Oil Recycling Systems will give you peace of mind that you have done everything you can possibly do to keep the oil in your equipment in a state where you are doing a virtual oil change every 8 minutes…..while still using your equipment and getting your work done on the farm!

Imagine having the ability to go from your current maintenance schedule to being able to go 1200 hours between servicing your farm equipment?  It is vital to keep your equipment up and running in the field and not broken down and costing you money. With Kleenoil, it is possible!

Key Benefits of Kleenoil for Agriculture Equipment and Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for farm and agriculture applications if:

  • You put a large amount of miles/hours on your farm equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals.
    You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the
    engine, hydraulic systems, or transmissions.

Mining

Mines are traditionally filthy, low ventilation environments that can strain even the best filtration systems.  Kleenoil Onboard Oil Recycling Systems can give you peace of mind that your oil is staying clean 24 hours a day on your mining equipment and you will realize less downtime, more equipment availability, and longer equipment life!
Key Benefits of Kleenoil for Mining Applications

  • Extended oil drain intervals.
  • Reduced new oil purchases.
  • Better maintained oil viscosity.
  • Decreased sludge and varnish deposits.
  • Reduce operational costs.
  • Extend depreciation costs.
  • Reducing oil disposal fees.
  • Keeping your equipment and vehicles on the job sites longer!
  • Enhancing our environmental commitment and awareness.
  • Improving daily vehicle availability through scheduled maintenance.
  • Reducing unscheduled service breakdowns and costly repairs!
  • Freeing up technicians to perform other important service tasks!
  • Virtually eliminate engine wear.
  • Remove 99.95% of all water from your oil.
  • Removes all wear causing particles down to 1-micron in size.
  • Reduce time needed for service…those 1 hour oil changes become 5 minute filter changes!
  • Does NOT remove additive package components in oil.

Recommendations for Use
Kleenoil Onboard Oil Recycling Systems can be a valuable addition for mining applications if:

  • You put a large amount of miles/hours on your mining equipment annually.
  • You would like to save a large amount of money on oil changes through extended oil drain intervals.
    You could save as much as 90% over your previous oil maintenance schedule.
  • Equipment downtime is simply not an option.
  • You simply want the ultimate in protection for your equipment and want to maximize the life of the
    engine, hydraulic systems, or transmissions.

 

How To Buy
Locate Your Nearest Go Green World Products Sales Representative For information on where to purchase this item or for other questions regarding this product, contact your local authorized Go Green World Products, LLC representative.

Models
There are currently no models listed for this product.

CAD
There are currently no CAD drawings available for this product. To preview and download CAD Drawings for this product, please select a model/size from the list.

Approvals
Approval information is not available on this item, please contact our local Representative for this information.

Repair Kits
There are currently no repair kits listed for this product.

Service Policy:
For inoperative products beyond the warranty period, we assume no liability for replacement of valves due to service conditions beyond our control.

Returned Goods:
No material shall be returned without authorization. When credit is issued it will be at the price charged, or prevailing price if lower, less handling charges based on costs of reconditioning, boxing, etc. Products which are obsolete or made to special order are not returnable.

Limited Warranty:
The manufacture (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. Fittings, parts, pumps, faucets, tubing are not covered by this warranty. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control. This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.

Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above limitations may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to determine your rights. SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.